Air filter

Created to replace the standard air filter, it is built in carbon and contains a wide mesh oiled cotton gauze placed between metallic grilles and supported by a rubber seal without welding. The suspended oil does not reduce air flow but traps dust considerably increasing the action of the filter. If correctly washed and re-oiled every 10,000 km, it will last at least as long as the standard one. No modification of the standard cpu is required to mount it.


Exhaust system

Composed of a manifold, cpu and end section guaranteeing excellent performance and a exceptional sound: the end section has two outlets completely in 304 stainless steel. Perfectly adaptable to the standard rear spoiler. It is supplied with a warranty and homologation.


Alloy rims

Antera model 343 alloy rims with 8.5J x 19 and 9.5 x 19” measurements. Perfectly suitable also with enlarged brake circuit.


Tyres

The new technology used for PZero Nero, ensures a greater load capacity without compromising driving comfort thanks to the use of new materials and a flat profile which guarantees a more uniform distribution of pressure to the ground in the track area, providing greater stability at high speed and in the presence of elevated lateral accelerations. Thus this characteristics make P Zero Nero not only the ideal product for a change over, but also for those who want to give their car a new look, to best express their personality.

Balance

The Bilstein PSS suspension system has a threaded body and shock absorber calibration for absolute control of the vehicle even in extreme driving conditions. It is possible to adjust the shock absorber stiffness and also the height of the car from the ground.

Aesthetics

The aesthetics have been completely modified by widening the body by 7 cm per side. The aesthetics kit has been created to give a very aggressive look by partly changing the original lines of the car. A stabilizer has also been added to the rear boot which has an aesthetic and aerodynamic function.

Leather interiors

Based on the racing seats, an accurate job was done using top quality leather in order to be able to guarantee elegance and sturdiness at the same time. The design and leather type are in line with the personality of the car. There is an infinite number of colour combinations.

Brake circuit

This is a Brembo brake circuit with 4 pump unit callipers and 320mm x 28 mm disc in two parts. The most interesting feature is the enormous obtained braking power without needing to go and change the discs and rear pads. Obviously the disc is available either drilled or slotted. A rim of at least 17” is required given the dimensions of the kit.